Paradyne FrameSaver
DSL 9783 User Manual page 19

9783-A2-GB20-00
To obtain an activation certificate, provide the model number (9783), your
OpenLane system license key number, and the number of FrameSaver units
whose SLV capability is to be activated. When you receive your certificate, it will
include an Activation Certificate number, the Feature Group Number for the
additional SLV features (Feature Group 2), your OpenLane license key number,
and the number of device activations (license keys) ordered.
When ready to activate SLV capability in the unit(s), run the OpenLane SLM
application. It will prompt you for the serial numbers of the units to be activated,
their IP addresses, and whether the activations will be immediate or scheduled.
OpenLane then activates SLV capability in the designated units and the units are
reset. A report summary will be available that provides information about
the activation certificate, the activated units, and the number of license keys
remaining.
The following table summarizes the features that are included in the two feature
Basic Features
sets. See
Feature
Frame relay performance statistics
SLV performance statistics
(e.g., FDR/DDR, latency, CIR/EIR relationships)
Trap Log
Multiplexed user data DLCIs
Troubleshooting DLCI for remote management
Layer 2 (data link) diagnostics
(nondisruptive DLCI loopbacks)
PVC Burst Table
User history available via SNMP RMON2 polling
User history available via FTP
RMON alarms and proactive alarm thresholds
OpenLane SLM system real-time applications
OpenLane SLM system historical reports and graphs
NetScout Manager Plus support
Advanced SLV Features
and
July 2000
About the FrameSaver DSL Unit
for additional information.
Feature Set
Advanced
Basic
SLV
Yes Yes
No Yes
Yes Yes
No Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
No Yes
No Yes
Limited Yes
(no SLM)
No Yes
Alarms and Alarms and
history history
1-7