Configuring Frame Relay for the Network Interface
Select Frame Relay from the Network menu to display or change the network
Frame Relay options (see
Table 4-10. Network Frame Relay Options
Configuring DLCI Records for the Network Interface (9720)
DLCI records can be created and modified using the Network DLCI Records
screen.
DLCI Records options are similar for the network, data ports, and virtual router
ports. See
9700-A2-GB20-20
Main Menu
Configuration
Traffic Policing
Possible Settings: Enable, Disable
Default Setting: Enable
Determines if CIR (Committed Information Rate) and EIR (Excess Information Rate) are
enforced by the unit on frames sent to the network interface.
Enable – CIR and EIR are enforced:
– Frames that exceed CIR are marked Discard Eligible (DE).
– Frames in excess of EIR are discarded.
– For the CSU/DSU only, DE frames received from the external router are credited as
frames transmitted above CIR. They are credited as frames transmitted between
CIR and EIR until that count reaches its limit, at which point they are counted as
frames transmitted above EIR.
Disable – CIR and EIR are not enforced.
Main Menu
Configuration
Configuring DLCI Records
December 2002
Table 4-10, Network Frame Relay
Network
Frame Relay
Network
DLCI Records
on page 4-32.
4. Configuration Options
Options).
4-23