Paradyne FrameSaver
DSL 9783 User Manual page 121

9783-A2-GB20-00
Table 6-11. IP Routing Table Values
Column What It Indicates
Destination The Destination IP Address for the route:
001.000.000.000 – 223.255.255.255
Mask The Destination Subnet Mask for the route:
Gateway The Gateway IP Address for the route:
001.000.000.000 – 223.255.255.255
Hop The number of hops in the route to the destination (1–15).
If 16 appears, the route is in the process of being aged out.
Type The method used to add the route to the table.
Interface Specifies the interface to be used to reach the destination.
TTL The Time to Live that was set for the route, in seconds: 1 – 999
July 2000
000.000.000.000 – 225.255.255.255 for network routes
FFF.FFF.FFF.FFF for host routes
127 may appear as well. It is a reserved number.
RIP: The route was discovered through Routing Information
Protocol.
The route remains until its TTL (Time to Live) expires, a
better route is provided via RIP, or there is a power reset.
Loc: The route was added due to the FrameSaver unit's
local configuration; a Default IP Address or an SNMP
Manager Initial Route Destination have been configured.
The route remains until the unit's configuration changes.
NMS: The route was added by a Network Management
System using SNMP (Simple Network Management
Protocol).
The route remains until there is a power reset of the unit.
Tmp: The route was added as a temporary route in order to
respond to an IP packet that was received.
The route remains until its TTL expires or there is a power
reset.
COM: Communications port
Ethernet: Ethernet port
PVC name : Name of the management PVC
(e.g., PVCMgmt1001)
Internal: The interface to be used for software loopbacks or
internal device functions in order to reach the destination.
Operation and Maintenance
6-23