Paradyne FrameSaver
DSL 9783 User Manual page 10

About This Guide
viii
Section Description
Troubleshooting. Provides device problem resolution,
Chapter 8
alarm, and other information, as well as troubleshooting
and test procedures.
Chapter 9 Setting Up OpenLane for FrameSaver Devices. Identifies
where installation and setup information is located and how
FrameSaver units are supported.
Chapter 10 Setting Up Network Health for FrameSaver Devices.
Describes setup of Concord's Network Health application
so reports can be created for FrameSaver units, and
identifies those reports that apply to FrameSaver units.
Appendix A Menu Hierarchy . Contains a graphical representation of
how the user interface screens are organized.
Appendix B SNMP MIBs and Traps, and RMON Alarm Defaults.
Identifies the MIBs supported and how they can be
downloaded, describes the unit's compliance with SNMP
format standards and with its special operational trap
features, and describes the RMON-specific user history
groups, and alarm and event defaults.
Appendix C Connectors, Cables, and Pin Assignments. Shows the
rear panel, tells what cables are needed, and provides pin
assignments for interfaces and cables.
Technical Specifications.
Appendix D
Appendix E Equipment List.
Index Lists key terms, acronyms, concepts, and sections.
A master glossary of terms and acronyms used in Paradyne documents is
available on the World Wide Web at www.paradyne.com. Select Library
Technical Manuals Technical Glossary
.
July 2000 9783-A2-GB20-00