Paradyne FrameSaver
DSL 9783 User Manual page 106

Operation and Maintenance
6-8
Table 6-5. Device Messages (2 of 5)
Message What It Indicates
Duplicate DLCI DLCI number entered is not
Number unique for the frame relay
link.
File Transfer Complete A file transfer was
performed successfully.
(Seen at an FTP
terminal.)
File Transfer Failed – A file transfer was
Invalid file attempted, but it was not
successful.
(Seen at an FTP
terminal.)
Invalid Character ( x ) A non-valid printable ASCII
character has been
entered.
Invalid date: must be A non-valid date was
mm/dd/yyyy entered on the System
Information screen.
Invalid date and/or A non-valid date or time
time was entered on the System
Information screen. The
date does not exist (e.g.,
February 30th).
Invalid time: must be A non-valid system time
hh:mm:ss was entered on the System
Information screen.
Invalid – Already A test was already in
Active progress when it was
selected.
Invalid Password Login is required and an
incorrect password was
entered; access is denied.
Invalid Test A conflicting loopback or
Combination pattern test was in progress
when Start was selected to
start another test, or was
active on the same or
another interface when
Start was selected.
July 2000
What To Do
No action is needed; previous
contents of the DLCI number
field is restored.
Switch to the newly downloaded
software.
See Changing Software in
Chapter 7, FTP Operation .
Try again, making sure you
type the filename correctly.
Exit the FTP session, or
download another file.
See Changing Software in
Chapter 7, FTP Operation .
Reenter information using valid
characters.
Reenter the date in the
month/day/4-digit year format.
Reenter the date in the
month/day/4-digit year format
and/or time in the
hour:minutes:seconds format.
Reenter the time in the
hour:minutes:seconds format.
No action is needed.
Try again.
Contact your system
administrator to verify your
password.
Wait until other test ends and
message clears.
Cancel all tests from the Test
screen ( Path: main/ test ).
Stop the test from the same
screen the test was started
from.
9783-A2-GB20-00