Paradyne FrameSaver
DSL 9783 User Manual page 108

Operation and Maintenance
6-10
Table 6-5. Device Messages (4 of 5)
Message What It Indicates
No more DLCIs New or CopyFrom was
allowed selected from an interface's
DLCI Records configuration
screen, and the maximum
number of DLCI Records
had already been reached.
No Primary New or Modify was
Destination Link selected from the PVC
DLCIs Available Connection Table, but even
though DLCIs are available
to form a connection, no
DLCIs are available on the
network link, which is a
suitable Primary PVC
Destination.
No Security Records Delete was selected from
to Delete the Administer Login
screen, and no security
records had been defined.
Password Matching Password entered in the
Error – Re-enter Re-enter Password field of
Password the Administer Logins
screen does not match
what was entered in the
Password field.
Permission Denied A file transfer was
attempted, but the:
(Seen at an FTP
terminal.)
Please Wait Command takes longer
than 5 seconds.
Port Inactive The port is disabled, or it
supports synchronous data
and is configured for leased
line mode when a DTE
Loopback was started.
July 2000
User did not have
Level 1 security.
Wrong file was specified
when the put command
was entered.
User attempted to
upload a program file
from the unit.
What To Do
Delete a DLCI, then create the
new DLCI Record.
Configure additional DLCIs for
the network link and try again.
If a network DLCI has been
entered as a Source DLCI:
1. Change the Source DLCI to a
user data port DLCI.
2. Enter the network DLCI as the
PVC's Primary Destination.
No action is needed.
Enter a security record.
Try again.
Contact your system
administrator to verify your
password.
See your system administrator
to get your security level
changed.
Try again, entering the correct
file with the put command.
Enter the put command
instead of a get command;
you can only transfer files to
the unit, not from it.
See Upgrading System
Software in Chapter 7, FTP
Operation .
Wait until message clears.
No action is needed.
9783-A2-GB20-00