Specifications
Optical
Scan Pattern
Start Time
Pattern Size
Scan Rate
Frame Rate
Optical Resolution
Angular Orientation Tolerances
Pitch Tolerance
Skew
Rotational Tolerance
Dead Zone/Optical Throw
1-D Labels
2-D (PDF417) Labels
Print Contrast Resolution
1-D Labels
2-D (PDF417) Labels
Ambient Light Immunity
Electrical
Laser Diode Power
Power Requirements
0.065 sec. to 75% of steady state horizontal amplitude;
0.50 sec. to 90% of steady state vertical amplitude
At 9.5 in. (24.13 cm) from the nose of the scanner, the
pattern is 7.2 in. (18.3 cm) horizontally and 2.4 in. (6.1
cm ) vertically.
560 scans/second 280 Hz 10 horizontal
25 frames/second 12.5 Hz 1 horizontal
Can decode a 6.6 mil (minimum X-dimension) symbol
(PDF417); Y-dimension must be 3X.
30_ front-to-back
15_ from plane parallel to symbol (side-to-side)
_
4
(for scanning benchmark label, assuming 3:1
codeword aspect ratio)
_
2
from beam direction
_
9
from beam direction
25% absolute dark/light reflectance differential,
measured at 675 nm.
35% absolute dark/light reflectance differential,
measured at 675 nm.
8000 ft. candles (86,112 lux) of sunlight
1.2 mW, maximum
+5V dc, 390 mA (typical)
Appendix
A