Setting Ibm Pc Keyboard Wedge Synapse Cable Options; Defaults Settings - Allen-Bradley 2-D User Manual

Setting IBM PC Keyboard Wedge Synapse Cable Options

This section defines the communication options available when the
scanner is connected to one of these IBM AT/XT or PS/2 Keyboard
Wedge Synapse cables:
•
Catalog No. 2755-HFC-SP1-01
•
Catalog No. 2755-HFC-SP2-01
Settings
Defaults
Scan the Set PC Wedge Synapse Cable Defaults bar code to set the
synapse cable to default settings. The following table lists the
default settings.
Parameter
Host
Country
Bar Codes with
Unknown Labels
Intercharacter Delay 5 milliseconds
Parameter Set
Programming Guide for 2-D Bar Code Scanners (Publication 2755-6.7)
Communication Setup (Synapse Cable)
Default Setting
IBM PC/AT
IBM PS/2-50, 55SX, 60, 70,
80
North American
Send Bar Codes With
Unknown Characters
Parameter Set 1
Refer to
Description
on Page:
Page Reference
5–10
5–10
5–11
5–11
5–12
Publication 2755-6.4
5–9
Programming
Guide
3-2
3-3
3-4
3-4
3-5