Setting Dec Vt220/Vt320/Vt420 Keyboard Wedge Synapse Cable Options; Default Settings; Host Selection - Allen-Bradley 2-D User Manual

5–16
Setting DEC VT220 / VT320 / VT420 Keyboard Wedge
Synapse Cable Options
This section defines the communication options available when the
scanner is connected to this DEC Keyboard Wedge Synapse cable:
•
Catalog No. 2755-HFC-SV1-01

Default Settings

Scan the Set DEC VT 20/320/420 Wedge Synapse Cable Defaults
bar code to set the Synapse cable to default settings. The table below
lists the defaults.
Parameter
Host
Country
Unknown Characters Send Bar Codes With
Intercharacter Delay
Parameter Set
Programming Guide for 2-D Bar Code Scanners (Publication 2755-6.7)

Host Selection

Select the type of host the scanner will be communicating with.
The selections are:
•
DEC VT 220/320 (default)
•
DEC VT420
Publication 2755-6.4
Communication Setup (Synapse Cable)
Default Setting
DEC VT220 / 320
North American
Unknown Characters
5 Millisecond
Parameter Set 1
Refer to
Description
on Page:
5–16
5–17
5–17
5–17
5–18
Programming
Guide
Page Reference
5-2
5-2
5-4
5-4
5-5