Important Notes On Configuring Scanner; Configuration Bar Codes For Scanner - Allen-Bradley 2-D User Manual

Configuring the Scanner
This chapter describes the scanner configuration options.

Important Notes on Configuring Scanner

•
Bar codes for configuring the scanner and Synapse cable are
located in the Programming Guide for 2-D Bar Code Scanners
(Publication 2755-6.7).
•
Configure the scanner.
•
Configure the Synapse cable. Separate configuration codes are
scanned to configure the cable.
Chapter 5 describes the communication setup (cable
configuration) codes for the RS-232, keyboard wedge cable,
scanner emulation.

Configuration Bar Codes for Scanner

All configuration bar codes are found in the Programming Guide for
2-D Bar Code Scanners (Publication 2755-6.7). The scanner is
always enabled to read Code 128 configuration bar codes since all
configuration codes use this symbology.
Chapter
Publication 2755-6.4
4