Scanner To Slc Connection - Allen-Bradley 2-D User Manual

2–14

Scanner to SLC Connection

Use the 9-Pin RS-232 Synapse cable (Catalog No.
2755-HFC-SR3-01) to connect the scanner cable to the Channel 0
port on an SLC-5/03 or 5/04. The Channel 0 port must be
configured for RS-232 communications.
Power Supply
Note: Connect the
power supply last.
Refer to the user manuals for the Allen-Bradley Advanced
Programming Software (APS) to make sure the Channel 0 settings
match the Synapse cable settings.
Publication 2755-6.4
Connecting the Scanner
To Channel 0 Port
Scanner Cable
RS-232 Synapse Cable
(2755-HFC-SR3-01)
Channel 0
Scanner
SLC 5/04