Allen-Bradley 2-D User Manual page 104

E–6 Advanced Data Formatting
Actions
Select how to format the data for transmission.
•
Send Data – Send all data that follows, send all data up to a
specific character selected from the Alphanumeric Keyboard
bar codes, or send the next N characters. N= any number from 1
to 254, selected from the Alphanumeric Keyboard.
•
Setup Fields – Define fields as follows:
–
Move Cursor To Character – Scan this bar code, then any
printable ASCII character from the Alphanumeric
Keyboard. The cursor moves to the position after the
matching character. If the character is not there, the rule fails
and ADF tries the next rule.
–
Move Cursor to Start – Scan this bar code to move cursor to
the beginning of the data.
–
Move Cursor to Position "N" – Scan this bar code, then
select the position to which you want to move (1 to 254) from
the Numeric Keypad bar codes.
–
Move Cursor Ahead "N" Positions – Scan this bar code,
then select the number of positions ahead you want to move (0
to 254) from the Numeric Keypad bar codes.
–
Move Cursor Back "N" Positions – Scan this bar code, then
select the number of positions back you want to move (0 to
254) from the Numeric Keypad bar codes.
–
Move Cursor Past Character – This parameter will move
the cursor past all occurrences of a selected character. Scan
this bar code, then select a character from the Alphanumeric
Keyboard bar codes. If the character is not there, the cursor
does not move (has no affect).
Publication 2755-6.4