Setting Dec Vt520 Keyboard Wedge Synapse Cable Options; Default Settings - Allen-Bradley 2-D User Manual

Setting DEC VT520 Keyboard Wedge Synapse Cable Options

This section defines the communication options available when the
scanner is connected to this DEC Keyboard Wedge Synapse cable:
•
Catalog No. 2755-HFC-SV2-01

Default Settings

Scan the Set DEC VT 520 Keyboard Wedge Synapse Cable
Defaults bar code to set the Synapse cable to default settings. Refer
to the table below for the default settings.
Parameter
Host
Country
Unknown Characters Send Bar Codes With
Intercharacter Delay
Parameter Set
Programming Guide for 2-D Bar Code Scanners (Publication 2755-6.7)
Communication Setup (Synapse Cable)
Default Setting
DEC VT520
North American
Unknown Characters
5 Millisecond
Parameter Set 1
Refer to
Description
on Page: Page Reference
5–14
5–14
5–14
5–14
5–15
Publication 2755-6.4
5–13
Programming
Guide
4-2
4-2
4-4
4-4
4-5