Scan The Entire Bar Code Symbol - Allen-Bradley 2-D User Manual

3–4
When the scanner has decoded a symbol successfully:
•
laser turns off
•
green LED lights
•
short, high-tone beep occurs
4. Decoded data is transmitted to the host device using the
communication parameters described in Chapter 5.

Scan the Entire Bar Code Symbol

•
The larger the symbol, the farther away you should hold the
scanner to permit the raster pattern to cover the symbol (but not
more than 8 inches).
•
Hold the scanner close for denser symbols (but not less than 2
inches).
•
In all cases, make sure the scan pattern extends at least three
quarters of an inch beyond each edge of the bar code.
•
The PDF417 bar code symbol has multiple rows, but the raster
pattern also has multiple scanning rows. Do three basic things
when scanning:
–
Center the aiming pattern on the bar code.
–
Keep the pattern in the same horizontal plane as the bar code.
3/4"
Publication 2755-6.4
Orienting Scan Pattern on PDF417 Bar Code
Operating the Scanner
3/4"