Scanner Cable Connection - Allen-Bradley 2-D User Manual

Scanner Cable Connection

The scanner cable (Catalog No. 2755-HTC-GS1-08) connects to the
bottom of the scanner handle. The other end of the scanner cable
connects to the Synapse cable.
To attach the cable to the scanner:
1. Pull back the locking collar from the connector.
2. Insert the cable connector into the scanner.
3. Align the tabs on the locking collar with the slots on the handle.
4. Push in and turn the locking collar counterclockwise to lock.
Connector is locked when flat edge of locking collar aligns with
the front edge of the scanner handle.
Remove a scanner cable from a scanner by rotating the locking collar
clockwise until the cable be pulled out of the scanner.
Connecting the Scanner
Connector
Slot for Tab on Collar
Locking Collar
Cable Connector
Publication 2755-6.4
2–3