Scanner To Plc Connection - Allen-Bradley 2-D User Manual

Scanner to PLC Connection

Use the 25-Pin RS-232 Synapse cable (Catalog No.
2755-HFC-SR2-01) to connect the scanner cable to the Channel 0
port of a PLC-5. The Channel 0 port must be configured for RS-232
communications.
Power Supply
Note: Connect the
power supply last.
Refer to the user manuals for the Allen-Bradley 6200 Series
Programming Software to make sure the Channel 0 settings match
the Synapse cable settings.
Connecting the Scanner
Scanner Cable
RS-232 Synapse Cable
(2755-HFC-SR2-01)
To Channel 0 Port
2–13
Scanner
PLC-5
Publication 2755-6.4