Configuring The Scanner; Scanner Default Settings - Allen-Bradley 2-D User Manual

4–2

Configuring the Scanner

1. Connect the appropriate Synapse cable to the scanner.
2. Apply power to the Synapse cable (if required).
3. Scan the Set Defaults bar code (in the Programming Guide for
2-D Bar Code Scanners) to configure the scanner with default
settings. Table 4.A lists the scanner default settings.
4. Scan individual bar codes (in the Programming Guide for 2-D
Bar Code Scanners) for parameters you want to change.
5. Scan the communication bar codes for the Synapse cable.

Scanner Default Settings

Table 4.A
Scanner Default Settings
Configuration Parameters
Set Default
Symbologies
Code 39 Options
Code 39 Full ASCII
Code 39 Check Digit
UPC/EAN Options
Transmit UPC-A Check Digit
Transmit UPC-E Check Digit
Convert UPC-E to UPC-A
Decode UPC / EAN Supplemental
Convert EAN-8 to EAN-13
UPC-A Preamble
UPC-E Preamble
Publication 2755-6.4
Configuring the Scanner
Default Setting
Set Defaults
All Enabled,
except
I 2 of 5, and
Codabar
Enabled
Disabled
Enabled
Enabled
Disabled
Disabled
Disabled
System
Character
System
Character
Programming
Guide Reference
1-1
1-3
1-6
1-6
1-7
1-7
1-7
1-8
1-8
1-9
1-9