Emulation Timeout; Polarity; Unknown Characters - Allen-Bradley 2-D User Manual

Emulation Timeout

Determines how long:
•
the Synapse cable waits for the laser on signal from the scanner
after the trigger is pulled.
•
the scanner waits for a decode LED (check if Decode LED is
enabled).
The options:
•
3 second timeout (default)
•
4 second timeout
•
5 second timeout
•
10 second timeout
•
30 second timeout

Polarity

Sets the polarity of the wand emulation signal. The selections are:
•
Margin Low / Bar High (default)
•
Margin High / Bar Low

Unknown Characters

Unknown characters are characters not recognized by the scanner.
When Send Bar Codes with Unknown Characters is enabled, all
decoded bar code data is transmitted except for the unknown
characters. If this option is disabled, bar codes containing one or
more unknown characters are not transmitted.
Communication Setup (Synapse Cable) 5–21
Publication 2755-6.4