Security Features; Advanced Features - LevelOne WAP-6012 User Manual

Wireless Access Point User Guide

DHCP Client Support.
namic IP address to PCs and other devices upon request. The Wireless Access
Point can act as a DHCP Client, and obtain an IP address and related information
from your existing DHPC Server.

Upgradeable Firmware.
upgraded easily, using only your Web Browser.

PoE Support.
Wireless Access Point, so only a single cable connection is required.

Security Features


Virtual APs.
Virtual AP. Up to 4 Virtual APs can be defined and used as any time.

Multiple BSSIDs.
up to 4 Virtual APs can be active simultaneously, multiple SSIDs are supported.
Different clients can connect to the Wireless Access Point using different SSIDs,
with different security settings.

Virtual APs Isolation.
Virtual APs can be isolated from each other.

VLAN Support.
different sources to be segmented. Combined with the multiple SSID feature, this
provides a powerful tool to control access to your LAN.

WEP support.
Bit 128 Bit, and 152 Bit keys are supported.

WPA support.
and should be used if possible. Both TKIP and AES encryption methods are sup-
ported.

802.1x Support.
al-strength wireless security of 802.1x authentication and authorization.

Radius Client Support.
Radius Server (as a Radius client).

Radius MAC Authentication.
Station MAC addresses by using a Radius Server.

Rogue AP Detection.
(Rouge) Access Points on your LAN.

Access Control.
Wireless clients to ensure that only trusted Wireless Stations can use the Wireless
Access Point to gain access to your LAN.

Password - protected Configuration
provided to prevent unauthorized users from modifying the configuration data and
settings.

Advanced Features


Command Line Interface.
used for configuration. This provides the possibility of creating scripts to perform
common configuration changes.

Auto Configuration.
by copying the configuration data from another Access Point. This feature is
enabled by default.
Dynamic Host Configuration Protocol provides a dy-
Firmware is stored in a flash memory and can be
You can use PoE (Power over Ethernet) to provide power to the
For maximum flexibility, wireless security settings are stored in
Because each Virtual AP has it own SSID and beacon, and
If desired, PCs and devices connecting to different
The 802.1Q VLAN standard is supported, allowing traffic from
Support for WEP (Wired Equivalent Privacy) is included. Both 64
Support for WPA is included. WPA is more secure than WEP,
Support for 802.1x mode is included, providing for the industri-
The Wireless Access Point can login to your existing
The Wireless Access Point can detect unauthorized
The Access Control feature can check the MAC address of
If desired, the command line interface (CLI) can be
The Wireless Access Point can perform self-configuration
You can centralize the checking of Wireless
. Optional password protection is
2