Operation Panel Removal; Printer Panel Board Removal - Epson Stylus Photo 895 Service Manual

EPSON Stylus PHOTO 895/785EPX
Tightening Torque for Screw
• C.B.S 3x6 F/ZN screw for ground screw on the housing: 3.5 +/- 1 kgf.cm
To install the housing, make sure to install the FFC and the
Earth of monochrome panel.
Disassembly and Assembly
Monochrome panel earth
Disassembly

4.2.2 Operation Panel removal

The panel board equipped with printer is as follows:
Printer panel board: C408PNL-B
Monochrome panel board: C408PNL

4.2.2.1 Printer Panel Board Removal

1. Remove the Housing from the printer. (Refer to Section 4.2.1 "Housing
Removal")
2. Remove 3 screws (C.B.S 3x6 F/ZN and C.B.P 3x8 F/ZN) securing the Operation
Panel Assembly. Then, remove the Operation Panel Assembly from the Printer
Mechanism.
C.B.S 3x6 F/ZN
Figure 4-7. Removing 3 screws for Operation Panel
Revision A
C.B.P 3x8 F/ZN
75