Epson Stylus Photo 895 Service Manual page 96

EPSON Stylus PHOTO 895/785EPX
Make sure that all gears are set in each gear shaft on the Ink
system frame.
Spur Gear 14.4, 38.4
Figure 4-43. Gear engagement on the Ink system frame
Make sure that the ink tube is placed along the following
position.
Ink Tube
Figure 4-44. Ink tube placing position
After installing the Pump Assembly, ensure that the cleaner
parts move back and forth by rotating the Gear.
Disassembly and Assembly
Combination Gear 37.6, 44.4
Combination Gear 9.6, 24
Pump Unit
Cap Assembly
Disassembly
Tightening torque for screw
• C.B.S 3x6 F/ZN screw for ink system frame & Cap assembly.: 9+/1 kgf.cm
Revision A
96