EPSON Stylus PHOTO 895/785EPX
4.
Push the two hooks of the LD roller shaft holder as shown in the following figure.
5.
Pull the LD roller shaft holder unit upward from the Main frame.
Two hooks for LD roller holder
Figure 4-28. Pushing two hooks of the LD roller shaft holder
Disassembly and Assembly
6.
Remove the LD roller along with the Clutch mechanism from the LD roller shaft
holder unit.
LD Roller shaft holder unit
Clutch mechanism
Figure 4-29. Removing the LD roller with Clutch mechanism
Disassembly
Revision A
Panel shield plate
LD Roller
89