EPSON Stylus PHOTO 895/785EPX/915/825
Tightening Torque for Screw
• C.B.S 3x6 F/ZN screw for ground screw on the housing: 3.5 +/- 1 kgf.cm
To install the housing, make sure to install the FFC and the
Earth of monochrome panel.
Disassembly and Assembly
Monochrome panel earth
Disassembly
4.2.2 Operation Panel removal
The panel board equipped with printer is as follows:
Printer panel board:
C408 PNL-B
Monochrome panel board:
C408 PNL
4.2.2.1 Printer Panel Board Removal
1.
Remove the Housing from the printer. (Refer to Section 4.2.1 "Housing
Removal")
2.
Remove 3 screws (C.B.S 3x6 F/ZN and C.B.P 3x8 F/ZN) securing the Operation
Panel Assembly. Then, remove the Operation Panel Assembly from the Printer
Mechanism.
C.B.S 3x6 F/ZN
Figure 4-7. Removing 3 screws for Operation Panel
Revision B
C.B.P 3x8 F/ZN
77