Setting Up The Dvr Network Connections; Figure 3-49 Main Monitoring Setup Screen - Honeywell HRSD4 User Manual

Configuration
Option
Sequence Dwell
Time
Note
Event Monitoring
Event Monitoring
Dwell Time

Setting Up the DVR Network Connections

In the Network Setup screen you can set up the DVR for LAN and modem connections.
You can access the Network Setup screen in two ways:
•
1.
2.
3.
82
Figure 3-49
Function
Highlight the field beside Sequence Dwell Time and press
seconds.
The DVR does not sequence the camera that are experiencing video loss.
Highlight the field beside Event Monitoring and press
toggle between On and Off.
When set to On, video from the lowest numbered camera
among those connected with the event-detected sensor
displays full-screen on the main monitor for the preset dwell
time.
Highlight the field beside Event Monitoring Dwell Time and
press
from 3 to 60 seconds.
From the Main menu, select Network, and then Network Setup.
OR
From the Main menu, select Quick Setup and press
appears.
Select the field beside Quick Setup, and press
become active.
Highlight Network Setup and press
Main Monitoring Setup Screen
. You can adjust the sequence dwell time from 3 to 60
. You can adjust the event monitoring dwell time
. The Network Setup screen appears.
. The Quick Setup screen
to toggle On. More fields
to