Table of Contents
Advertisement
Setting the DVR ID Using the Remote Control
Returning to the Original ID Settings
DVR Operation
Making the connections
Powering up the DVR
Document 800-06847 Rev B
08/10
1.
Press the ID button on the remote control.
An Input ID message displays.
2.
Press the Set ID, then press RETURN.
1.
Press the ID button again.
2.
Enter 255, then press the RETURN button on the remote control.
Connect:
•
up to 16 camera inputs (DVR model dependent)
•
monitors to the DVR using the Composite or DVI connections
•
power to the DVR. The DVR checks for proper power connection, and then emits
two beeps.
Press the POWER button on the front panel of the DVR to begin operation. The Startup
screen appears.
HREP Color Digital Video Recorder User Guide
27
Advertisement
Table of Contents
