Rapid Dome Or Rapid Dome Gold Dome Systems; Detachable Camera I/O; Figure 2-2 Camera Connections To Dvr - Honeywell Rapid Eye Installation Manual

Rapid Dome or Rapid Dome Gold Dome Systems

Detachable Camera I/O

Document 800-02607V3 Rev A
11/09
Figure 2-2 Camera Connections to DVR
IN IN
1 2
OUT OUT
Connect the camera sequentially; that is, connect the first camera to VIDEO IN 1, the
second camera to VIDEO IN 2, and so on.
The BNC connector's low signal loss, ease of twist-on installation, and small size, make it
a common connector for CCTV connections. Honeywell recommends using a solder- or
crimp-type connector.
Video is quite sensitive to bad connectors; do not use screw-type connectors. These can
seriously compromise the performance of your DVR.
With Rapid Dome or Rapid Dome Gold dome systems, using twisted pair transmission,
Honeywell recommends that passive-to-passive transmission distances be no more than
500 feet (154 meters). For greater distance, please use an active receiver such as an
HUTP652R.
A detachable sub-panel is used for mounting the camera input/output (I/O) connectors and
monitor outputs. This is convenient for swapping the DVR with another without having to
disconnect cameras.
Rapid Eye™ Multi-Media DVR Installation Guide
27