Figure 3-36 Alarm In Event Action (Record) Setup Screen - Honeywell HRSD4 User Manual

Configuration
Highlight Alarm-In Action in the Event Action menu and press
Action (Record) setup screen appears.
1.
2.
3.
4.
5.
6.
Alarm In Event Action (Alarm Out) Setup Screen
The DVR can be set to react differently to events by activating an internal buzzer or
external alarms.
Document 800-00919 Rev F
02/08
Note The following procedures are the same for both Mode 1 and
Mode 2.
Figure 3-36
Highlight the Sched field and press
schedule as described earlier (see
Highlight the Camera field and press
Select the number(s) of the camera(s) you would like to associate with the sensor.
Note You can associate multiple cameras with a sensor.
Highlight the Speed field and select from the drop-down menu the number of
images per second you would like to record.
Highlight the Quality field and select from the drop-down menu the image quality
you want for the recording.
Highlight the Dwell Time field and set the length of time you would like to record
for the associated event.
Save your changes by highlighting OK and pressing
the screen without saving the changes.
Alarm In Event Action (Record) Setup Screen
. A schedule screen appears. Set the
Scheduling an Alarm Output
. A camera selection screen appears.
. The Alarm In Event
on page 59).
. Select Cancel to exit
69