Turning On The Power; Initial Unit Setup; Figure 3-3 Admin Password Screen - Honeywell HRSD4 User Manual

Configuration

Turning on the Power

Connecting the power cord to the DVR turns on the unit. The unit takes approximately
60 seconds to initialize.

Initial Unit Setup

Before using your DVR for the first time, you need to establish the initial settings. This
includes items such as:
•
•
•
•
•
•
•
•
Your can set up these items using various screens and dialog boxes.
1.
2.
Document 800-00919 Rev F
02/08
time and date (see Setting up the Date and Time
display language (see
camera (see Configuring Input Devices
audio (see Setting the DVR to Record Audio
remote control (see Communicating with External Devices Using the RS-232C Port
on page 60)
record mode (see Configuring Recording Settings
network (see Setting Up the DVR Network Connections
password (see Changing Network Passwords
Administrator Password
Press the Menu button on the front panel or remote control to enter the setup
screens. The Admin Password screen appears.
Figure 3-3
Enter the password by pressing the appropriate combination of camera number
buttons and then
screens: Quick Setup and Normal Setup. The factory default is the Quick Setup
screen.
Changing the Language Setting
on page 50)
on page 95)
Admin Password Screen
. The factory default password is 4321. There are two Setup
on page 41)
on page 39)
on page 59)
on page 61)
on page 82)
on page 83 and Changing the
35