Figure 3-59 Password Setup Screen - Honeywell HRSD4 User Manual

Configuration
A User password is required for the following actions:
•
•
•
1.
2.
Changing the Administrator Password
You can change the Administrator password by first entering the current password,
entering a new password, and then confirming the new password.
1.
2.
3.
4.
Document 800-00919 Rev F
02/08
to enter playback
to control fast forward playback and fast backward playback modes from live
monitoring mode
to enter the search menu screen in live monitoring mode
Highlight Password in the Main menu and press
screen.
Figure 3-59
Highlight the field beside User and press
If you set the password to On, you are asked to enter the current password so that
you can turn the Password function Off.
If you set the password to Off, you are asked to enter the new password and to
confirm it before the Password function is turned On.
Note The Administrator password cannot be turned On and Off.
Highlight the Password field and press
appears asking you to enter the current password.
Enter the current password. If you enter the correct password, another screen
appears.
Use the camera buttons to enter the new password, and then press
screen appears asking you to confirm the new password.
Confirm the new password.
Password Setup Screen
to enter the Password
to toggle between On and Off.
to change the password. A screen
. Another
95