Honeywell HRSD4 User Manual page 84

Configuration
3.
Changing a User Password
1.
2.
3.
Caution
Setting the Transfer Speed
Transfer Speed is the number of images that can be transferred per second for each
camera.
Highlight the field beside Transfer Speed, then press
Caution
84
Enter the new password. You must confirm the new password before it is
accepted.
Highlight the field beside User Password and press
appears.
Enter the current password.
Enter the new password. You must confirm the new password before it is
accepted.
Note These passwords are for network use. They are different from the
Admin and User passwords for the DVR itself. See
DVR Passwords
Write the password down and keep it in a safe place. After
resetting the password, the default no longer works. If you forget
the password, the unit must be reset using the Factory Reset
button and you risk losing all data settings.
Note The maximum transfer speed over a LAN is 30 images per
second (25 ips for PAL) when the resolution is set to Standard.
However, when set to High, the transfer speed decreases to 15
images per second (12.5 ips for PAL).
Selecting the maximum transfer speed STOPS the recording of
video. You must adjust the transfer speed if you want to continue
recording.
on page 94 for more about the DVR passwords.
. A virtual keyboard
Setting Up
to adjust the number.