Figure 3-21 Alarm In Setup Screen - Honeywell HRSD4 User Manual

Configuration
2.
Setting the Alarm In Settings
The alarm terminal strip on the back of the DVR has inputs associated with each alarm.
You can:
•
•
•
•
Highlight Alarm In in the Main menu and press
appears.
To turn the Alarm In On or Off, and to change the setting from NC to NO,
Setting the Motion Detector
Your DVR has a built-in video motion detector. For each camera, you can:
•
•
•
Highlight Motion Detector in the Main menu and press
screen appears.
52
Change the number by highlighting it and using the Up and Down arrow buttons
to increase and decrease the number. The PTZ ID number can be set from 0 to
256.
set up each input on the Alarm In Setup screen
turn each input On (via Alarm I/O or Camera Alarm) or Off
give each input a title
independently set the inputs as NO (normally open) or NC (normally closed)
Figure 3-21
turn motion detection On and Off
set the sensitivity level from 1 to 5
select the image area to be monitored for motion detection
Alarm In Setup Screen
. The Alarm In setup screen
. The Motion Detector setup