Figure 3-52 Port Number Setup Screen - Honeywell HRSD4 User Manual

Configuration
3.
4.
5.
86
Highlight the field beside DNS Server and press
the DNS server. If you set up the DNS Server, you can use the domain name of
the DVRNS server instead of the IP address during the DVRNS Server setup. See
Registering the Network for DVRNS Service
Highlight Port Number Setup... and press
appears.
Figure 3-52
Note You need to get the appropriate Port Number for each
RASplus-related program (Admin, Watch, Search, and Callback)
from your network administrator.
Change the number by highlighting it and using the Up and Down arrows to
increase or decrease the number.
The factory default Port settings are:
Remote Admin:
Remote Watch:
Remote Search:
Remote Callback:
Note The system restarts automatically after changing the port
settings.
Note Do NOT use the same port number for two different programs,
otherwise, the DVR cannot be connected with a PC running
RASplus.
Port Number Setup Screen
8200
8016
10019
8201
to enter the IP address of
on page 89 for details.
. The Port Number Setup screen