Figure 3-39 Motion Detector Event Action (Record) Setup Screen - Honeywell HRSD4 User Manual

Configuration
2.
3.
4.
When the DVR detects alarm input, the
Motion Detector Event Action (Record) Setup Screen
The DVR can be set to react to motion detection differently. Each camera can be
assigned:
•
•
•
•
•
Highlight Motion Detector Event Action (Record) in the Event Action menu and press
1.
Document 800-00919 Rev F
02/08
Highlight the Sched field and press
schedule as described earlier see
Highlight the Notify field and press
to On, the DVR notifies the remote site when certain events occur based on a
defined schedule.
Save your changes by highlighting OK and pressing
the screen without saving the changes.
Note For the Notify action to work, the DVR should be registered in the
RASplus (Remote Administration System). Refer to the RASplus
User's Manual.
a schedule
an associated camera
a recording speed
a video quality
a dwell time
. The Motion Detector Action (Record) setup screen appears.
Figure 3-39
Highlight the Sched field and press
schedule as described earlier (see
. A schedule screen appears. Set the
Scheduling an Alarm Output
to toggle between On and Off. When set
displays on each associated camera.
Motion Detector Event Action (Record) Setup Screen
. A schedule screen appears. Set the
Scheduling an Alarm Output
on page 59).
. Select Cancel to exit
on page 59).
71