Lldp - D-Link DGS-3000 series Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Switch Web UI Reference Guide
Operational East Port
Admin RPL Port
Operational RPL Port
Admin RPL Owner
Operational RPL
Owner
Protected VLAN(s)
Ring MEL (0-7)
Holdoff Time (0-10000)
Guard Time (10-20000)
WTR Time (5-12)
Revertive
Current Ring State
Click the Apply button to accept the changes made.
Click the <<Back button to return to the previous window.

LLDP

LLDP
LLDP Global Settings
On this page the user can configure the LLDP global parameters.
To view the following window, click L2 Features > LLDP > LLDP > LLDP Global Settings, as show below:
The fields that can be configured are described below:
Parameter
LLDP State
Display the operational east port value.
Specify the RPL port used. Options to choose from are West Port, East Port, and
None.
Display the operational RPL port value.
Specify to enable or disable the RPL owner node.
Display the operational RPL owner value.
Specify to add or delete the protected VLAN group.
Specify the ring MEL of the R-APS function. The default ring MEL is 1.
Specify the hold-off time of the R-APS function. The default hold-off time is 0
milliseconds.
Specify the guard time of the R-APS function. The default guard time is 500
milliseconds.
Specify the WTR time of the R-APS function.
Specify the state of the R-APS revertive option.
Display the current Ring state.
Figure 4-85 LLDP Global Settings window
Description
Click the radio buttons to enable or disable the LLDP feature.
120