D-Link DGS-3000 series Reference Manual page 40

DGS-3000 Series Layer 2 Managed Gigabit Switch Web UI Reference Guide
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.
Click the IPv4 Edit button to see the following window.
The fields that can be configured are described below:
Parameter
Get IP From
Interface Name
IPv4 Address
Subnet Mask
VLAN Name
IPv4 State
Interface Admin State
DHCP Option 12 State
DHCP Option 12 Host
Name
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.
Click the IPv6 Edit button to see the following window.
The fields that can be configured or displayed are described below:
Figure 3-9 IPv4 Interface Settings – Edit window
Description
Use the drop-down menu to specify the method that this Interface uses to acquire an
IP address.
Enter the name of the IP interface being configured.
Enter the IPv4 address used.
Enter the IPv4 subnet mask used.
Enter the VLAN Name used.
Use the drop-down menu to enable or disable IPv4 State.
Use the drop-down menu to enable or disable the Interface Admin State.
Use the drop-down menu to enable or disable insertion of option 12 in the
DHCPDISCOVER and DHCPREQUEST message.
Enter the host name to be inserted in the DHCPDISCOVER and DHCPREQUEST
message.
Figure 3-10 IPv6 Interface Settings window
32