Authenticator Diagnostics - D-Link DGS-3000 series Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Time Interval
Click the OK button to accept the changes made.
NOTE: The user must first globally enable Authentication Mode in the 802.1X Global Settings
window before initializing ports. Information in this window cannot be viewed before enabling
the authentication mode for either Port-based or MAC-based.

Authenticator Diagnostics

This window is used to display the authenticator diagnostics information.
To view this window, click Security > 802.1X > Authenticator Diagnostics as shown below:
Figure 8-18 Authenticator Session Statistics - MAC-based window
Description
Use the drop-down menu to select the interval to update the statistics.
194