Time Zone Settings - D-Link DGS-3000 series Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Switch Web UI Reference Guide
To view this window, click Network Application > SNTP > SNTP Settings as shown below:
The fields that can be configured or displayed are described below:
Parameter
SNTP State
Current Time
Time Source
SNTP First Server
SNTP Second
Server
SNTP Poll Interval In
Seconds (30-99999)
Click the Apply button to accept the changes made.

Time Zone Settings

Users can configure time zones and Daylight Savings Time settings for SNTP.
To view this window, click Network Application > SNTP > Time Zone Settings as shown below:
Figure 9-18 SNTP Settings window
Description
Use this radio button to enable or disable SNTP.
Displays the Current Time.
Displays the time source for the system.
The IP address of the primary server from which the SNTP information will be taken.
The IP address of the secondary server from which the SNTP information will be taken.
The interval, in seconds, between requests for updated SNTP information.
260