Keyboard Shortcut Commands - Lantronix XPort Pro Command Reference Manual

Keyboard Shortcut Commands

Typing enough characters to uniquely identify a command is a shortcut for that
command.
Tab completion: Typing some characters then typing <tab> will display the first command
that begins with those characters. Typing <tab> again will display the next command that
begins with the original characters typed. While the command is displayed, you may
press <enter> to execute the command or you may backspace to edit any parameters.
The following key combinations are allowed when configuring the device server from the
command line interface (CLI):
Ctrl + a: place cursor at the beginning of line
Ctrl + b: backspace one character
Ctrl + d: delete one character
Ctrl + e: place cursor at the end of the line
Ctrl + f: move cursor forward one character
Ctrl + k: delete from the current position to the end of the line
Ctrl + l: redraw the command line
Ctrl + n: display the next line in the history
Ctrl + p: display the previous line in the history
Ctrl + u: delete entire line and place cursor at start of prompt
Ctrl + w: delete one word back
Ctrl + z: a shortcut for the exit command
Esc + b: move cursor back one word
Esc + f: move cursor forward one word
XPort Pro™ Command Reference
2: Configuration Using Telnet or a Serial Port
12