Assembling Crankcase Half - Arctic Cat DVX 400 2006 Manual

FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
6. Remove the remaining 5th drive washer from
the countershaft.
Assembling
1. Install the first 5th drive washer onto the coun-
tershaft.
2. Install the 5th drive gear; then install the second
5th drive washer onto the countershaft. Secure
with the circlip.
3. Install the 3rd drive gear; then install the 4th
drive circlip onto the countershaft.
4. Install the 4th drive washer and 4th drive gear
onto the countershaft.
www.mymowerparts.com
Back
3-34
CC199D
CC199D
CC200D
Back to TOC
5. Install the 2nd drive gear and washer onto the
countershaft.
NOTE: The countershaft is now completely
assembled for installation.
Assembling Crankcase
Half
NOTE: For ease of assembly, install components
on the left-side crankcase half.
1. Install the left end of the crankshaft into the
crankcase using the appropriate crankshaft
installer tool.
NOTE: Never fit the crankshaft into the crank-
case by striking it with a plastic mallet as the accu-
racy of the crankshaft alignment may be affected.
Back to Section TOC
CC201D
CC204D
Next