Arctic Cat DVX 400 2006 Manual page 141

FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
NOTE: When installing the tie rod, the shorter
end of the tie rod (1) should be directed toward the
steering knuckles. The yellow surfaced nuts (2) are
left-hand threads.
5. Install the oil tank (see Section 4).
6. Install the radiator assembly (see Section 4).
7. Fill with oil and coolant; then bleed the cooling
system (see Section 2).
8. Assemble the handlebar (1), handlebar holder
(2), and steering head cover bracket (3) with the
stepped end of the lower holder (A) directed
rearward; then finger-tighten the cap screws.
www.mymowerparts.com
Back
8-6
SP416A
ATV2200
ATV2201
Back to TOC
9. Adjust the handlebar in the holders to align the
punch mark (B) with the mating surface of the
handlebar holders. Tighten first the forward cap
screws (4) to specifications; then tighten the
rearward cap screws (5) to specifications.
10. Install the steering head cover (6).
11. Install the handlebar switch assembly engaging
the locator lug (C) into the hole (D) in the han-
dlebar.
Back to Section TOC
ATV2202
SP418
SP419
Next