Resolving Startup Problems - Cisco 6901 Administration Manual

Troubleshooting and Maintenance
This chapter provides information that can assist you in troubleshooting problems with your Cisco
Unified IP Phone or with your IP telephony network. It also explains how to clean and maintain your
phone.
If you need additional assistance to resolve an issue, see the
Support, and Security Guidelines" section on page
This chapter includes these topics:
•
•
•
•
•
•
•
•

Resolving Startup Problems

After installing a Cisco Unified IP Phone into your network and adding it to Cisco Unified
Communications Manager, the phone should start up as described in the
Process" section on page
troubleshooting information:
•
•
•
•
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24582-01
Resolving Startup Problems, page 7-1
Cisco Unified IP Phone Resets Unexpectedly, page 7-6
General Troubleshooting Tips, page 7-8
Resetting or Restoring the Cisco Unified IP Phone, page 7-10
Monitoring the Voice Quality of Calls, page 7-11
Using Voice Quality Metrics, page 7-11
Where to Go for More Troubleshooting Information, page 7-13
Cleaning the Cisco Unified IP Phone, page 7-13
3-9. If the phone does not start up properly, see the following sections for
Symptom: The Cisco Unified IP Phone Does Not Go Through its Normal Startup Process, page 7-2
Symptom: The Cisco Unified IP Phone Does Not Register with Cisco Unified Communications
Manager, page 7-2
Symptom: Cisco Unified IP Phone Unable to Obtain IP Address, page 7-5
Symptom: The Cisco Unified IP Phone Displays Flashing Red Light, page 7-5
C H A P T E R
"Obtaining Documentation, Obtaining
xi.
"Verifying the Phone Startup
7
7-1