Sharp AR-M355U Service Manual page 203

SIMULATION 61-3
LASER POWER SETTING(FAX). PRESS START.
1.FAX 110
Press [START] key. Press [CUSTOM SETTINGS] key or [START] key.
SIMULATION 61-3
LASER POWER SETTING(FAX). INPUT VALUE 67-150, AND PRESS
START.
1.FAX
61-4
Purpose Adjustment
Function Used to adjust the laser power (absolute value) in
(Purpose) the printer mode.
Section Scanner (write) unit (LSU)
Item Operation
Operation/Procedure
1) Select the number corresponding to the adjustment mode with
10-key.
2) Press [START] key.
3) Enter the adjustment value with 10-key.
Set range 67-150
Default 76 (AR-M351U/M355U)
93 (AR-M451U/M455U)
4) Enter [START] key.
NOTE: Be sure to set the default value. If not, a trouble may occur
in the LSU.
SIMULATION 61-4
LASER POWER SETTING(PRINTER). PRESS START.
1.PRINTER 100
Press [START] key. Press [CUSTOM SETTINGS] key or [START] key.
SIMULATION 61-4
LASER POWER SETTING(PRINTER). INPUT VALUE 67-150, AND
PRESS START.
1.PRINTER
62
62-1
Purpose Data clear
Function Used to format the hard disk.
(Purpose) (Only in the model with a disk installed)
Section MFP controller (HDD)
Item Clear
Operation/Procedure
1) Select YES/NO of hard disk format.
1 YES Execution
2 NO Cancel
2) Press [START] key.
During formatting, "EXECUTING" is displayed. When formatting is
completed normally, "OK" is displayed. If not, "NG" is displayed.
1
110
1
100
AR-M351U/M451U, AR-M355U/M455U SIMULATION 9 - 67
SIMULATION 62-1
HDD FORMAT.
ARE YOU SURE?
1. YES
2. NO
Press [START] key.
SIMULATION 62-1
HDD FORMAT. EXECUTING···.
Completion
SIMULATION 62-1
HDD FORMAT. OK. (or NG)
62-2
Purpose Operation test/Check
Function Used to check the operation of the hard disk (read/
(Purpose) write). (Only in the model with a disk installed)
(Partial check)
Section MFP controller (HDD)
Item Operation
Operation/Procedure
1) Select YES/NO of hard disk read/write check.
1 YES Execution
2 NO Cancel
2) Press [START] key.
During testing, "EXECUTING" is displayed. When test is com-
pleted normally, "OK" is displayed. If not, "NG" is displayed.
SIMULATION 62-2
HDD R/W TEST.
ARE YOU SURE?
1. YES
2. NO
Press [START] key.
SIMULATION 62-2
HDD R/W TEST. EXECUTING···.
Completion
SIMULATION 62-2
HDD R/W TEST. OK. (or NG)
1
Press [CUSTOM SETTINGS] key.
1
Press [CUSTOM SETTINGS] key.