Sharp AR-M355U Service Manual page 186

SIMULATION 46-39
FAX SHARPNESS LEVEL SETUP. SELECT 1-12, AND PRESS
START.
1:OC_NORMAL 3 2:OC_FINE
4:OC_SFINE 3 5:OC_SFINE(H)
7:OC_UFINE(H) 1 8:OC_600
10:SPF1_NORMAL 3 11:SPF1_FINE
13:SPF1_SFINE 3 14:SPF1_SFINE(H)
16:SPF1_UFINE(H) 1 17:SPF1_600
19:SPF2_NORMAL 3 20:SPF2_FINE
22:SPF2_SFINE 3 23:SPF2_SFINE(H)
25:SPF2_UFINE(H) 1 26:SPF2_600
28:CIS_NORMAL 3 29:CIS_FINE
31:CIS_SFINE 3 32:CIS_SFINE(H)
34:CIS_UFINE(H) 1 35:CIS_600
Press [START] key.
SIMULATION 46-39
FAX SHARPNESS LEVEL SETUP. INPUT VALUE 1-3, AND PRESS
START.
1:OC_NORMAL
46-45
Purpose Adjustment
Function Used to adjust the image density in the FAX mode
(Purpose) (600dpi).
Item Picture quality
Operation/Procedure
1) Select the number corresponding to one of the following
adjustment items with 10-key. (Select one of 0 - 11.)
Normal mode (Image density adjustment level)
Normal mode (Image density adjustment level) (Half-tone
mode)
Auto mode
Auto mode (Half-tone mode)
2) Press [START] key.
3) Enter the image density adjustment value with 10-key.
4) Press [START] key or press [P] key.
The adjustment value is set.
Item
0 AUTO Auto
1 1.0 Exposure level 1
2 2.0 Exposure level 2
3 3.0 Exposure level 3
4 4.0 Exposure level 4
5 5.0 Exposure level 5
6 AUTO (H) Auto (Half-tone)
7 1.0 (H) Exposure level 1 (Half-tone)
8 2.0 (H) Exposure level 2 (Half-tone)
9 3.0 (H) Exposure level 3 (Half-tone)
10 4.0 (H) Exposure level 4 (Half-tone)
11 5.0 (H) Exposure level 5 (Half-tone)
3 3:OC_FINE(H) 1
1 6:OC_UFINE 3
3 9:OC_600(H) 3
3 12:SPF1_FINE(H) 1
1 15:SPF1_UFINE 3
3 18:SPF1_600(H) 1
3 21:SPF2_FINE(H) 1
1 24:SPF2_UFINE 3
3 27:SPF2_600(H) 1
3 30:CIS_FINE(H) 1
1 33:CIS_UFINE 3
3 36:CIS_600(H) 1
Press [CUSTOM SETTINGS] key.
Set
Default
range
0 - 99 50
AR-M351U/M451U, AR-M355U/M455U SIMULATION 9 - 50
SIMULATION 46-45
EXP.LEVEL SETUP FAX(600dpi). SELECT 0-14, AND PRESS START.
0.TRAY SELECT 1 1.PRINT START
2.EXP LEVEL 1
3.AUTO 50 4.1.0
6.3.0 50 7.4.0
9.AUTO(H) 50 10.1.0(H)
12.3.0(H) 50 13.4.0(H)
Select other than 0 - 2,
and press [START] key.
SIMULATION 46-45
EXP.LEVEL SETUP FAX(600dpi),INPUT VALUE 0-99,AND PRESS
START.
2.AUTO
Press [START] key.
Select 1, and
press [START] key.
SIMULATION 46-45
EXP.LEVEL SETUP FAX(600dpi). NOW PRINTING.
Select 0, and press [START] key.
SIMULATION 46-45
EXP.LEVEL SETUP FAX(600dpi). SELECT 1-5,AND PRESS START.
(FEED TRAY)
3.TRAY1 2.TRAY2 3.TRAY3 4.TRAY4
5:BPT
Select 2, and
press [START] key.
SIMULATION 46-45
EXP. LEVEL SETUP FAX(600dpi). SELECT 3-8,AND PRESS START.
(EXP. LEVEL SELECT)
3.AUTO 4.1.0
6.3.0 7.4.0
9.AUTO(H) 10.1.0(H) 11.2.0(H)
12.3.0(H) 13.4.0(H) 14.5.0(H)
46-46
Purpose Adjustment
Function Used to adjust sharpness of the scanner mode.
(Purpose)
Item Picture quality
Operation/Procedure
1) Enter the sharpness level with 10-key.
2) Press [START] key.
The greater the adjustment value is, the greater the sharpness is.
Set range: 1 - 3
Default: 3 (Normal), 1 (Halftone)
50 5.2.0 50
50 8.5.0 50
50 11.2.0(H) 50
50 14.5.0(H) 50
Press [CUSTOM SETTINGS] key.
50
Press [CUSTOM SETTINGS] key,
or terminate copying.
Press [START] key, or
press [CUSTOM SETTINGS] key.
Press [START] key, or
press [CUSTOM SETTINGS] key.
5.2.0
8.5.0
1
1
1