Sharp AR-M355U Service Manual page 160

24
24-1
Purpose Data clear
Function Used to clear the misfeed counter, the misfeed
(Purpose) history, the trouble counter, and the trouble
history. (The counters are cleared after completion
of maintenance.)
Item Counter
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
1 PAPER JAM Number of paper jams
2 SPF JAM Number of SPF jams
3 TROUBLE Number of troubles
SIMULATION 24-1
JAM/ TROUBLE COUNTER DATA CLEAR. SELECT1-3, AND
PRESS START.
1. PAPER JAM
2. SPF JAM
3. TROUBLE
Press [START] key. Press [CUSTOM SETTINGS] key or [START] key.
SIMULATION 24-1
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
* = PAPER JAM, SPF JAM, TROUBLE
24-2
Purpose Data clear
Function Used to clear the number of use (the number of
(Purpose) prints) of each paper feed section.
Section Paper feed
Item Counter
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
1 TRAY1 Tray 1 use quantity
2 TRAY2 Tray 2 use quantity
3 TRAY3/LCC1 Tray 3/LCC left tray use quantity
4 TRAY4/LCC2 Tray 4/LCC right tray use quantity
5 BPT Manual feed tray use quantity
6 ADU Duplex feed quantity
1
1
AR-M351U/M451U, AR-M355U/M455U SIMULATION 9 - 24
SIMULATION 24-2
PAPER FEED COUNTER DATA CLEAR. SELECT1-6, AND PRESS
START.
1. TRAY1 2. TRAY2
3. TRAY3/LCC1 4. TRAY4/LCC2
5. BPT 6. ADU
Press [START] key. Press [CUSTOM SETTINGS] key or [START] key.
SIMULATION 24-2
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
* = TRAY1, TRAY2, TRAY3/LCC1, TRAY4/LCC2, BPT,
ADU
24-3
Purpose Data clear
Function Used to clear the number of use of the finisher,
(Purpose) SPF, and the scan (reading) unit.
Section
Item Counter
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
1 SPF SPF paper pass quantity
2 SCAN Number of times of document scan
3 STAPLER Number of times of stapling
4 PUNCH Number of times of punching
5 STAMP Number of times of SPF finish stamp
SIMULATION 24-3
ORG./STAPLE COUNTER DATA CLEAR. SELECT 1-5, AND PRESS
START.
1. SPF
2. SCAN
3. STAPLER
4. PUNCH
5. STAMP
Press [START] key.
SIMULATION 24-3
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
* = SPF, SCAN, STAPLER, PUNCH, STAMP
1
1
1
Press [CUSTOM SETTINGS] key or
[START] key.
1