Sharp AR-M355U Service Manual page 162

SIMULATION 24-7
DRUM COUNTER DATA CLEAR. SELECT1, AND PRESS
START.
1. DRUM
Press [START] key. Press [CUSTOM SETTINGS] key or [START] key.
SIMULATION 24-7
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
* = DRUM
24-9
Purpose Data clear
Function Used clear the printer mode print counter and the
(Purpose) self print mode print counter.
Section Printer
Item Counter
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
After replacing the OPC drum, be sure to clear the OPC drum
counter.
1 PRINTER Printer counter (Print mode)
2 OTHERS Other effective paper counter (Self print mode)
SIMULATION 24-9
PRINTER/OTHERS COUNTER DATA CLEAR. SELECT1-2, AND
PRESS START.
1. PRINTER
2. OTHERS
Press [START] key. Press [CUSTOM SETTINGS] key or [START] key.
SIMULATION 24-9
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
* = PRINTER, OTHERS
1
1
1
1
AR-M351U/M451U, AR-M355U/M455U SIMULATION 9 - 26
24-10
Purpose Data clear
Function Used to clear the FAX counter. (Only when FAX is
(Purpose) installed)
Section FAX
Item Counter
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
1 FAX SEND Number of times of FAX send
2 FAX RECEIVE Number of times of FAX receive
3 FAX OUTPUT FAX print quantity
4 SEND IMAGES Send quantity
5 SEND TIME Send time
6 RECEIVE TIME Receive time
SIMULATION 24-10
FAX COUNTER DATA CLEAR. SELECT1-6, AND PRESS START.
1. FAX SEND
2. FAX RECEIVED
3. FAX OUTPUT
4. SEND IMAGES
5. SEND TIME
6. RECEIVE TIME
Press [START] key. Press [CUSTOM SETTINGS] key or [START] key.
SIMULATION 24-10
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
* = FAX SEND, FAX RECEIVED, FAX OUTPUT, SEND IMAGES,
SEND TIME, RECEIVE TIME
24-11
Purpose Data clear
Function Used to reset the OPC drum rotation time, and the
(Purpose) DV unit rotation time counter. The developer
counter in the DV unit installed is reset.
Section Image process (Photoconductor/Developing/
Transfer/Cleaning)
Item Counter
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
1 DRUM ROTATION
2 DV ROTATION
1
1
Developer
OPC drum rotation time
DV unit rotation time