Installing The Cooling Shroud - Dell PowerEdge C8220 Hardware Owner's Manual

Servers
Hide thumbs Also See for PowerEdge C8220:
Table of Contents

Advertisement

Figure 3-10. Removing and Installing the Cooling Shroud
1
1
M3 screws (2)
3
anchor tab

Installing the Cooling Shroud

CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
CAUTION:
system may get overheated quickly, resulting in shutdown of the system and loss of
data.
1 Lower the cooling shroud to the sled tray. See Figure 3-10.
2 Gently press the cooling shroud until the anchor tab snap securely into
place. See Figure 3-10.
3 Replace the two screws securing the cooling shroud to the sled tray.
See Figure 3-10.
4 Replace the sled. See "Installing a Sled" on page 144.
152
Installing System Components
Many repairs may only be done by a certified service technician. You
Never operate your system with the cooling shroud removed. The
2
2
cooling shroud
3

Advertisement

Table of Contents
loading

Table of Contents