Dell PowerEdge C8220 Hardware Owner's Manual page 193

3 Remove the internal hard-drives. See "Removing a Hard-Drive Carrier" on
page 188.
4 Remove the hard-drive tray. See "Removing the Hard-Drive Tray" on
page 191.
5 Press down the cable-locking tab and disconnect the power cable from the
interposer extender. See Figure 3-37.
6 Remove the two screws securing the interposer extender to the sled tray.
See Figure 3-37.
7 Grasp the interposer extender by its edges and carefully remove it from the
system board connector.
8 Lift the interposer extender out of the sled tray. See Figure 3-37.
Figure 3-37. Removing and Installing the Interposer Extender
1 M3 screws (2)
3 power cable
2
1
3
2 interposer extender
Installing System Components
193