Dell PowerEdge C8220 Hardware Owner's Manual page 228

Servers
Hide thumbs Also See for PowerEdge C8220:
Table of Contents

Advertisement

Table 5-2. System Board Jumper Settings
Item
Jumper
2
NVRAM clear
3
ME firmware
recovery
4
BIOS recovery
5
Password enable
6
Flash descriptor
security override
7
Power button
pass
228
Jumpers and Connectors
Setting
(default) The configuration settings are retained at
(default) The ME firmware recovery jumper is
(default) The BIOS recovery jumper is disabled.
(default) The password feature is enabled.
(default) The flash descriptor security override is
(default) The BMC triggers a power button signal.
Description
system boot.
The configuration settings are cleared at
the next system boot.
disabled.
The ME firmware recovery jumper
enables ME firmware recovery mode.
The BIOS recovery jumper enables the
BIOS flash memory special recovery
mode.
The password feature is disabled.
enabled.
The flash descriptor security override is
disabled.
The power button passthrough signal is
triggered.

Advertisement

Table of Contents
loading

Table of Contents