Dell PowerEdge C8220 Hardware Owner's Manual page 29

Error Error Message
Code
002Fh No Microcode
Be Updated
8012h SATA 0 Device
Not Found
8013h SATA 1 Device
Not Found
8014h SATA 2 Device
Not Found
8015h SATA 3 Device
Not Found
Response Error Cause
Pause Processor
microcode load
failed
Pause SATA 0 device
not found
Pause SATA 1 device
not found
Pause SATA 2 device
not found
Pause SATA 3 device
not found
Corrective Actions
Ensure that your processors
match and conform to the
type described in the
processor technical
specifications outlined in
your system's Getting Started
Guide.
Check if the SATA port 0 is
enabled. See "SATA
Configuration" on page 77.
Install a SATA device to SATA
port 0.
If the problem persists, see
"Getting Help" on page 241.
Check if the SATA port1 is
enabled. See "SATA
Configuration" on page 77.
Install a SATA device to SATA
port 1.
If the problem persists, see
"Getting Help" on page 241.
Check if the SATA port 2 is
enabled. See "SATA
Configuration" on page 77.
Install a SATA device to SATA
port 2.
If the problem persists, see
"Getting Help" on page 241.
Check if the SATA port 3 is
enabled. See "SATA
Configuration" on page 77.
Install a SATA device to SATA
port 3.
If the problem persists, see
"Getting Help" on page 241.
About Your System
29