Removing A Double-Wide Sled Blank; Installing A Double-Wide Sled Blank - Dell PowerEdge C8220 Hardware Owner's Manual

Removing a Double-Wide Sled Blank

Squeeze and hold the release latches and slide the blank out of the enclosure.
See Figure 3-6.
Figure 3-6. Removing and Installing a Double-Wide Sled Blank
1
2
1 release latches (2) 2 double-wide sled blank

Installing a Double-Wide Sled Blank

Hold the blank with the guide rail facing forward. Slide the blank into the
enclosure until it is fully seated and the release latches snap into place.
See Figure 3-6.
146
Installing System Components